mini. output current max. output current (note 1) line regulation load regulation rated output current output voltage ripple & noise p-p (note 2) initial setting accuracy (note 3) 1a 8a 1% 2% 5.5a +5v 50mv 5.08v to 5.13v 0.1a 5a 1% 4% 2.5a +12v 120mv 11.4v to 12.6v 0a 6a 1% 4% 4a +3.3v 50mv 3.10v to 3.50v 0a ---- 1% 4% 0.75a +5vsb 120mv 4.80v to 5.20v 0a ---- 1% 5% 0.5a -12v 120mv -11.4v to -12.6v specifications mpi-p10h ac-dc industrial power supply total output power 100w continuously maximum convection cooling, peak 120w with forced air (note 4) note: 1) the maximum total combined output power on the +3.3v and +5v rails is 50w 2) measured by a 20mhz bandwidth limited oscilloscope and the each output is connected with a 10uf electrolytic capacitor and a 0.1uf ceramic capacitor 3) the +5v output is set between 5.08v to 5.13v by variable resistor and all output at 60% rated load and the other outputs are checked to be within the accuracy range 4) total maximum output power 100w at 25 o c and 80w at 50 o c convection cooling. maximum 100w and peak 120w with 10.2cfm forced air-cooling dimensions 17.05 x 8.3 x 4.1 cm, tolerance +/-0.4mm 4.1 8.3 17.05 use #6-32 screw protrusion limit 3.5mm x 4 5.5 3.05 10.0 4.0 1.4 5.5 1.4 0.2 cn3 1 1 cn4 1 cn2 100w ac-dc power supply MPI-806H 80w ac-dc atx power supply min. output current max. output current (note 1) line regulation load regulation rated output current output voltage ripple & noise p-p (note 2) initial setting accuracy (note 3) 0.5a 8a +/-1% 2% 5a +5v 50mv 5.08v to 5.13v 0a 3a +/-1% 4% 1.5a +12v 120mv 11.4v to 12.6v 0a 6a +/-1% 4% 4a +3.3v 50mv 3.10v to 3.50v 0a ---- +/-1% 4% 0.75a +5vsb 120mv 4.80v to 5.20v 0a ---- +/-1% 5% 0.5a -12v 120mv -11.4v to -12.6v specifications total output power 80w at 50 o c environment temperature (note 4) note: 1) the maximum total combined output power on the +3.3v and +5v rails is 40w 2) measured by a 20mhz bandwidth limited oscilloscope and the each output is connected with a 10uf electrolytic capacitor and a 0.1uf ceramic capacitor 3) the +5v output is set between 5.08v to 5.13v by variable resistor and all output at 60% rated load and the other outputs are checked to be within the accuracy range 4) total maximum load cannot exceed 80w with 8.6cfm forced air-cooling and 60w convection cooling dimensions 12.8 x 8.1 x 4.0 cm, tolerance +/-0.4mm 0.8 6.5 1.55 6.5 0.635 0.65 0.635 0.65 11.53 12.8 8.1 4.0 ? 5.3, ? 3.0 transformer n l cn1 cn cn 1 12 1 0.25 screw measuring the screw protrusion first: customer system use#6-32 screw protrusion limit 2.5mmx4
|
